It's nicknamed formwork plywood because it's often used to shape concrete structures, so formwork ply is an essential component of construction projects. Re-use certainly adds to the environmental impact, but it also helps to ensure that any formwork plywood you buy is as environmentally friendly as possible.
In this article, we will go through a number of aspects of formwork and also the benefits it brings to construction over concrete and why, so read on to find out.
Handle with Care
Handle with care: don’t drop or drag the panels. Carry them safely and stack them flat to transport them.
Regular Cleaning and Maintenance
Brush clean all sides of this formwork ply with a medium-stiff broom after its use, removing concrete, dirt and any other debris that has accumulated. Light scuff marks or minor damage should be attended to immediately to prevent an initial problem from becoming a significant repair.
A single piece of plywood, if properly cared for, will provide countless reuses.
Proper Storage
Store your formwork ply in a dry, covered place away from moisture and direct sunlight. Stack the sheets off the ground and loosely cover them to circulate airflow and prevent warping and degradation.
Use Protective Coatings
You can coat the plywood itself with layers of protective sealant to form a hard, dry, water-resistant film  moisture penetration and may reduce the need for release agents between pours).
Avoid Metal Bars for Stripping
Don’t use metal bars when stripping formwork, as they will scrape the surface of the Plywood and damage the edges. Instead, use wooden wedges.
Formwork V Concrete - The Advantages
Formwork is an integral part of modern constructions. Apart from its intrinsic benefits, numerous advantages can be achieved extending from the use of formwork to the common method of concrete construction.
This time, we will elaborate on the essential advantages of formwork construction.
Formworks are used in construction projects where joint concrete surfaces are required. Additionally, formworks are employed in the case of structural members when they require concrete surfaces on both sides.
Not Just One Advantage - Multiple Advantages
Formworks offer countless advantages.
Firstly, they facilitate a comprehensive and uniform application of concrete.
Secondly, it is easier to ensure an accurate, uniform and equidistant elevation of construction projects when using formworks, as opposed to laying concrete.
Lastly, formwork can create all kinds of forms. Moreover, forms can be conveniently removed from the concrete after it has hardened.
Structural Support and Load Management
Formwork is the temporary structural element that holds freshly poured concrete in the shape required and during the time it takes to acquire the necessary strength to withstand the loads applied to it.
Shape and Geometry
Formwork makes it possible to build complex and even bespoke shapes: architecture and builders become able to deliver even challenging designs and parts.
Quality Control
The precise, straight design, and accurate installation of formwork guarantees that concrete is cast with the least blemishes and is finely and evenly placed, thus increasing the overall aesthetics and integrity of the final structure.
Safety
Machinery for formwork makes it secure for workers so that it is easy to keep work safe, secure, stable and avoid an accident and injury on the construction site.
Cost Efficiency
With efficient formwork systems, we can bring the construction time and amount of labour down to the minimum. This results in a short downtime or overlapping times of the work phases, and therefore, less time and money are spent.
Environmental Impact
Modern formwork systems, therefore, are designed for economy and for objective environmental impact, which is smaller but still not negligible in relation to concrete. The formwork for a 250 mm-thick concrete element contributes about 4.5% to the value of objective environmental impact.
The other benefit is that reusable formwork produces much less waste, making it a more ecological solution.
Technological Advancements
Therefore, the development of formwork technology (such as modular systems that can be easily set up and taken down) helps to expedite the building process and reduce life-cycle costs.
Where to Buy Formwork Ply in Sydney
If you want to buy formwork ply in Sydney, LF Construction Services is your port of call. With a plethora of previous builds and references to view and research, you’ll find that we are the premier Formwork Ply in the city.
You can get everything you need, whether it's for a house or a bridge, enabling you to select the correct formwork ply in Sydney for your needs.
SUMMARY
These advantages allow formwork to be a core part of the construction process: by means of formwork, concrete structures develop the required strength, durability and safety, as well as being cost-effective.
The role of formwork in construction is indispensable. Alongside its own benefits, numerous advantages can be achieved by using formwork in concrete construction.
Comments